24"x24"x 2" PAVER*
Application:
(*) Minimum order required for this product. Please contact us
for details.
The use of light colored concrete pavers
as rooftops protection has become widely accepted due to the
environmental advantages, the aesthetic appeal and the benefit
of making a rooftop functional. Pavers installed on pedestals
can be used to create walkways, pool decks, terraces or seating
areas while providing positive drainage. Plumbing, electrical
and other utility need often run below the pavers. The raised
pavers allow for the leveling of uneven surfaces, the free
movement of air and the easy drainage of water.
Artistic
Paver Pedestal pavers can be installed on pedestals directly on
the roof surface. Available in all Artistic Paver styles, they
can express a unique architectural signature that identifies
within its urban or commercial surroundings.
Usage: Pedestrian Applications
Concrete is an environmentally friendly building material
in all stages of its life span, from raw material production to
demolition, making it a natural choice for sustainable
construction. Highly decorative, Artistic Pavers offers light
colors in different styles. Light colors have higher SRI (solar
reflectivity indexes) contributing to reduce the urban heat
island effect.
Highly decorative, Artistic Pavers offers light colors in
different styles. Light colors have higher SRI (solar
reflectivity indexes) contributing to reduce the urban heat
island effect.
Our Pavers are made with a special beveled edge
around the perimeter of the product. This allows for each paver
to match up together with a slightly lowered edge. Not only does
this feature give the product a finished look, but it also helps
in preventing any of the pieces from chipping out during
installation.
Nominal Size: 24"x24"x2"
(600mmx600mmx51mm)
Freeze-Thaw: Our
pavers passed the 50-cycle freeze-thaw requirements
Compression Strength: 9,039 PSI Average, Test Method: ASTM C936
Modulus of Rupture: 810 PSI Average, Test Method: ASTM C1782
DCOF: According to the B 101.3 section 4.3, a DCOF higher than
0.42 is classified as having a High Slip Resistance (lower
probability of slipping). When testing our standard polished
products (non-custom) using the equipment BOT-3000E, the wet
DCOF was greater than 0.50.